NEWS
Shandong QDKS M&E Equipment Co.,LTD
27
2023
-
03
Electrolytic aluminum anode steel jaws of various questions to solve, must see!
Author:
Anode steel claw is an essential device in the anode guide in the process of electrolytic aluminum production, in which it plays the role of the connection between the top of the anode guide with aluminum guide and the bottom of the anode carbon block, the production consumables of the anode components composed of.
Anode steel claw is an essential device in the anode guide in the process of electrolytic aluminum production, in which it plays the role of the connection between the top of the anode guide with aluminum guide and the bottom of the anode carbon block, the production consumables of the anode components composed of.
Anode steel claw aluminum slag electrolyte
As a consumable, the anode jaws and their aluminum guide rods will be consumed after one month of production in the electrolysis plant, at which time the old anode components will be removed and replaced with new ones. However, there will be aluminum slag and electrolyte left on the old guide rods. The cleaning of the electrolyte will also be done in the anode assembly plant.
Anode jaw protection ring
In addition to removing the electrolyte from the periphery of the anode jaws, the phosphor ring wrapped around the jaws needs to be removed, and here the phosphor ring is pressed off by a press machine, and finally blasted clean for recycling.
Anode steel claw manufacturing process and production
In addition to the recycling of anode steel claws, there are also professionally produced. The electric arc furnace and medium frequency furnace with rare earth refining are used to ensure the gas content in the steel, the electrical conductivity and strength index of the claw.
Anode steel claw type
The general production has parallel three claws, four claws, three-dimensional four claws, six claws, eight claws, double anode steel claws and other models.
Anode steel jaws technical standards
Anode steel jaws are consumables in the process of aluminum electrolysis production, and its consumption level and replacement frequency are generally based on the production limits of the electrolysis plant. The mobilization of the anode assembly is only operated when the busbar is lifted and the anode is changed. Generally, when the anode carbon block is consumed to 15~18 days, the bus bar needs to be lifted once and the anode assembly needs to be adjusted once.
However, the consumption of the anode carbon block is about 30 days, at which time the anode needs to be replaced, and each replacement of the anode is a consumption of the anode steel claw, which has a replacement cycle of 30 cycles, i.e., 30 months, and is replaced once every two and a half years on average. Sometimes need to look at the specific degree of consumption to determine, which is the anode steel claw.
Translated with www.DeepL.com/Translator (free version)
Previous page
Next page
Previous page
Next page
undefined
We sincerely looking forward to cooperating with you !
Add
100 Nanxinzhuang West Road, Huaiyin District, Jinan City, Shandong Province
Tel/ WhatsApp
Shandong QDKS M&E Equipment Co.,LTD Powered by www.300.cn label yunzixun Business license
